How to Put the Umbrella Corporation Logo on Your Car

Introduction

Materials Needed

Preparing the Surface

Applying the Logo

Final Touches

Conclusion

Introduction

If you’re a fan of the Resident Evil franchise, you may be interested in displaying the iconic Umbrella Corporation logo on your car. In this article, we’ll walk you through the steps of how to do just that.

Materials Needed

To put the Umbrella Corporation logo on your car, you’ll need the following materials:

– Umbrella Corporation decal or sticker (available for purchase online)

– Rubbing alcohol

– Clean cloth

– Squeegee or credit card

Preparing the Surface

Before applying the decal, you’ll need to prepare the surface. Start by cleaning the area where you want to place the logo with rubbing alcohol and a clean cloth. This will ensure that the surface is free of any dirt, debris, or oils that could prevent the decal from adhering properly.

Applying the Logo

Once the surface is clean and dry, it’s time to apply the Umbrella Corporation logo. Peel the backing off the decal and position it on the car where you want it to go. Use a squeegee or credit card to smooth out any air bubbles and ensure that the decal is firmly adhered to the surface.

Final Touches

After applying the decal, take a step back and admire your work. If you notice any air bubbles or imperfections, use the squeegee or credit card to smooth them out. You can also use a hairdryer on low heat to help the decal conform to any curves or contours on the car.

Conclusion

Putting the Umbrella Corporation logo on your car is a great way to show off your love for the Resident Evil franchise. With the right materials and a little bit of patience, you can easily add this iconic symbol to your vehicle.

– Introduction

– Step 1: Choose the Right Place

– Step 2: Gather Supplies

– Step 3: Create a Stencil

– Step 4: Paint the Logo

– Step 5: Remove the Stencil

– Conclusion

Introduction

The Umbrella Corporation is a fictional company in the Resident Evil franchise, known for its iconic red and white logo. If you’re a fan of the series, you may want to show your love by adding the Umbrella Corporation logo to your car. In this article, we’ll show you how to do just that.

Step 1: Choose the Right Place

Before you start, you need to decide where on your car you want to place the logo. Some popular spots include the hood, the doors, and the rear windshield. Once you’ve chosen your spot, clean the area thoroughly to ensure that the logo will stick properly.

Step 2: Gather Supplies

To create the Umbrella Corporation logo, you’ll need a few supplies. These include:

– A piece of cardboard or thick paper

– A craft knife

– Spray paint in red and white

– Painter’s tape

– A ruler

– A pencil

Step 3: Create a Stencil

Using the cardboard or thick paper, create a stencil of the Umbrella Corporation logo. You can either freehand the design or print out a template online. Once you have the design, use the craft knife to cut out the logo, creating a stencil.

Step 4: Paint the Logo

Using the painter’s tape, secure the stencil to your car in the chosen spot. Make sure it’s level and centered. Next, use the ruler and pencil to mark off the areas where you want to paint red and white. Spray the red paint first, making sure to cover all the marked areas. Once the red paint is dry, remove the painter’s tape and stencil. Then, use the painter’s tape to cover the red areas and spray the white paint over the remaining marked areas.

Step 5: Remove the Stencil

Once the paint is dry, carefully remove the painter’s tape from the red areas. Your Umbrella Corporation logo should now be complete!

Conclusion

Adding the Umbrella Corporation logo to your car is a great way to show your love for the Resident Evil franchise. With a little bit of time and effort, you can create a unique and eye-catching design that will turn heads on the road. So go ahead and give it a try!