How to Make Your Own DIY Golf Cart Umbrella Holder A StepbyStep Guide

Golfing on a sunny day can be a great experience, but when the sun is beating down on you, it can quickly become uncomfortable. That’s where a golf cart umbrella comes in handy. However, not all golf carts come equipped with umbrella holders. In this article, we’ll show you how to make your own DIY golf cart umbrella holder in a few easy steps.

1. Gather Your Materials

To make your own golf cart umbrella holder, you’ll need a few materials. These include a PVC pipe, a PVC pipe cap, a PVC elbow joint, a PVC T-joint, a PVC end cap, a drill, and screws.

2. Measure and Cut the PVC Pipe

Measure the length of your golf cart’s handlebar and cut the PVC pipe to the same length. Make sure to leave enough space at the end for the PVC end cap.

3. Drill Holes in the PVC Pipe

Using your drill, make two holes in the PVC pipe where you want the umbrella to go. Make sure the holes are big enough to accommodate the umbrella handle.

4. Attach the PVC Elbow Joint

Attach the PVC elbow joint to one end of the PVC pipe. This will allow you to adjust the angle of the umbrella.

5. Attach the PVC T-joint

Attach the PVC T-joint to the other end of the PVC pipe.

6. Attach the PVC Pipe Cap

Attach the PVC pipe cap to the end of the PVC T-joint.

7. Secure the Holder to Your Golf Cart

Using screws, secure the holder to your golf cart’s handlebar. Make sure it is tight and secure.

8. Test It Out

Insert your umbrella into the holder and adjust the angle to your liking. Your DIY golf cart umbrella holder is now ready to use!

In summary, making your own DIY golf cart umbrella holder is a simple and inexpensive solution to keep you cool and comfortable on the golf course. With just a few materials and easy steps, you can create a custom umbrella holder that fits your golf cart perfectly.

Golfing can be a lot of fun, but sometimes the weather can be unpredictable. That’s why having an umbrella holder for your golf cart can be a game changer. In this article, we’ll show you how to make your own DIY golf cart umbrella holder in just a few simple steps.

Step 1: Gather Your Materials

To make your own golf cart umbrella holder, you’ll need a few materials. Here’s what you’ll need:

– PVC pipe (1 inch in diameter)

– PVC elbow joint (1 inch)

– PVC T-joint (1 inch)

– PVC end cap (1 inch)

– Hose clamp (1 inch)

– Drill

– Screws

– Saw

– Sandpaper

Step 2: Measure and Cut the PVC Pipe

Using a saw, measure and cut the PVC pipe into four pieces. Two pieces should be 9 inches long, one piece should be 3 inches long, and the last piece should be 1 inch long.

Step 3: Sand the PVC Pipe

After cutting the PVC pipe, use sandpaper to smooth out any rough edges.

Step 4: Drill Holes

Using a drill, make two holes in the 9-inch PVC pipes. The holes should be about 2 inches apart and 1 inch from the top of the pipe.

Step 5: Assemble the PVC Pipe

Take the PVC elbow joint and attach the 3-inch PVC pipe to one end. Attach one of the 9-inch PVC pipes to the other end of the elbow joint. Attach the PVC T-joint to the other end of the 9-inch PVC pipe. Take the remaining 9-inch PVC pipe and attach it to the other end of the T-joint. Finally, attach the 1-inch PVC pipe to the end of the 9-inch PVC pipe.

Step 6: Attach the Umbrella Holder to the Golf Cart

Using screws, attach the hose clamp to the 1-inch PVC pipe. Attach the umbrella holder to the golf cart by tightening the hose clamp around the golf cart’s frame.

Step 7: Test the Umbrella Holder

Now that you have assembled and attached the umbrella holder to your golf cart, it’s time to test it out. Insert the umbrella into the holes you drilled earlier and adjust the angle as needed.

Congratulations, you have successfully made your own DIY golf cart umbrella holder! Now you can enjoy golfing no matter what the weather brings.