How to Make a DIY Disc Golf Umbrella Holder

Disc golfers know the struggle of playing in the rain. Not only does it make the course more challenging, but it can also be difficult to keep your equipment dry. One solution to this problem is to use an umbrella while playing. However, holding an umbrella and throwing a disc at the same time is not an easy feat. That’s where a DIY disc golf umbrella holder comes in handy.

Materials Needed:

– PVC pipes (1 inch in diameter)

– PVC elbows and tees

– PVC cement

– Drill

– Screws

– Zip ties

– Umbrella

Instructions:

1. Measure and cut the PVC pipes to the desired length. The length will depend on the height of the umbrella and the height of the player.

2. Connect the PVC elbows and tees to create a frame. Use PVC cement to secure the joints.

3. Drill holes in the frame where the umbrella will be attached. Make sure the holes are big enough to fit the screws.

4. Use screws to attach the umbrella to the frame. It’s important to make sure the umbrella is securely attached.

5. Attach the holder to your disc golf bag using zip ties. Make sure it’s attached securely so it doesn’t swing around while you’re playing.

6. Test the holder by throwing a few discs with the umbrella attached. Make sure it’s not hindering your throw and that the umbrella is staying in place.

With this DIY disc golf umbrella holder, you can play in the rain without worrying about getting wet or having to hold an umbrella while throwing. It’s an easy and affordable solution for disc golfers who want to play in any weather condition.

Introduction

Materials Needed

Step-by-Step Guide

Conclusion

Introduction

Disc golf is a fun outdoor activity that can be enjoyed in any weather condition. However, when it’s raining, it can be difficult to keep your discs dry while carrying an umbrella. That’s where a DIY disc golf umbrella holder comes in handy. In this article, we’ll show you how to make your own umbrella holder for disc golf.

Materials Needed

– PVC pipe (1 inch diameter)

– PVC elbow joints (1 inch diameter)

– PVC T-joints (1 inch diameter)

– PVC cement

– Measuring tape

– Saw

– Sandpaper

– Umbrella

Step-by-Step Guide

1. Measure and cut the PVC pipe into the following lengths:

– Two pieces at 6 inches

– Two pieces at 12 inches

– Two pieces at 18 inches

2. Sand the edges of the cut PVC pipe to smooth out any rough spots.

3. Use PVC cement to attach the 12-inch pieces to the T-joints, creating two “legs”.

4. Attach the 6-inch pieces to the top of the legs using the elbow joints, creating a “U” shape.

5. Attach the 18-inch pieces to the bottom of the legs using the T-joints, creating a base.

6. Allow the PVC cement to dry completely before using the umbrella holder.

7. To use the umbrella holder, simply insert the umbrella into the top of the holder and place the base on the ground. The umbrella will stay in place while you play disc golf.

Conclusion

Making a DIY disc golf umbrella holder is a simple and affordable way to stay dry while playing disc golf in the rain. With just a few materials and some basic tools, you can create a sturdy and reliable holder that will keep your umbrella secure and your discs dry. Give it a try and see how much more enjoyable disc golf can be, even in wet weather!