How to Make a Disc Golf Cart Umbrella Holder

Are you tired of getting caught in the rain during a game of disc golf? Do you wish you had an easier way to protect yourself and your gear from the elements? Look no further than a DIY disc golf cart umbrella holder. With a few simple materials and some basic tools, you can create a convenient and functional accessory for your disc golf cart.

1. Gather your materials

To make a disc golf cart umbrella holder, you will need the following materials:

– PVC pipe (1 inch diameter)

– PVC elbow joint (1 inch diameter)

– PVC T-joint (1 inch diameter)

– PVC cap (1 inch diameter)

– Hose clamp

– Umbrella holder (available at most sporting goods stores)

2. Cut the PVC pipe

Using a saw or PVC pipe cutter, cut the PVC pipe into two pieces: one piece measuring 6 inches in length and another measuring 12 inches in length.

3. Assemble the base

Attach the PVC elbow joint to one end of the 6-inch PVC pipe. Then, connect the T-joint to the other end of the elbow joint. Finally, attach the 12-inch PVC pipe to the open end of the T-joint.

4. Attach the umbrella holder

Place the umbrella holder into the open end of the 12-inch PVC pipe. Use a hose clamp to secure the holder in place.

5. Finish the holder

Attach the PVC cap to the open end of the 6-inch PVC pipe. This will serve as the base for your umbrella holder. If desired, you can paint or decorate the PVC pipe to match your disc golf cart or personal style.

Congratulations, you now have a disc golf cart umbrella holder! Simply attach it to your cart and enjoy a dry and comfortable game, rain or shine.

Title:

Disc golf is a fun and challenging outdoor activity that can be played in any weather condition. However, playing in the rain can be quite uncomfortable, especially if you don’t have an umbrella holder for your disc golf cart. Fortunately, making a disc golf cart umbrella holder is an easy and inexpensive DIY project that can be completed in just a few steps.

Materials:

– PVC pipe (1 inch diameter)

– PVC elbow joint (1 inch diameter)

– PVC T-joint (1 inch diameter)

– PVC end cap (1 inch diameter)

– PVC cement

– Drill

– Screws

– Umbrella

Instructions:

Step 1: Cut the PVC pipe into three pieces – two equal lengths for the vertical supports and one longer piece for the horizontal support. The length of the vertical supports should be approximately the same height as your disc golf cart.

Step 2: Drill holes into the PVC T-joint and PVC elbow joint. Make sure the holes are big enough to accommodate the screws.

Step 3: Attach the vertical supports to the horizontal support using the PVC T-joint. Secure the joints with screws.

Step 4: Attach the umbrella holder to the top of the vertical supports using the PVC elbow joint. Secure the joint with screws.

Step 5: Cap the bottom of the vertical supports with the PVC end cap. Use PVC cement to secure the cap in place.

Step 6: Insert the umbrella into the holder and adjust the angle to provide the desired amount of coverage.

Congratulations! You have successfully made a disc golf cart umbrella holder. Now you can play disc golf in any weather condition without getting wet. This DIY project is not only easy and inexpensive, but it also allows you to customize the size and design of the umbrella holder to fit your specific needs. Happy disc golfing!