How to Make a Custom Umbrella Holder for Your Disc Golf Zuca

If you are an avid disc golfer, then you know how important it is to have the right equipment. One of the most essential pieces of equipment for any disc golfer is a Zuca cart. These carts are designed to hold all of your discs, water bottles, and other accessories, making it easier for you to navigate the course. However, if you are playing in rainy weather, you may find yourself struggling to find a convenient spot to store your umbrella. Fortunately, you can easily make a custom umbrella holder for your disc golf Zuca cart. Here’s how:

Materials You Will Need:

– PVC pipe (1 inch diameter, 10 inches long)

– PVC cap (1 inch)

– PVC elbow (1 inch)

– PVC tee (1 inch)

– PVC cement

– Drill

– Drill bit (1 inch)

– Zip ties

– Umbrella

Instructions:

1. Measure and cut the PVC pipe to 10 inches in length.

2. Using the drill and 1-inch drill bit, drill a hole in the center of the PVC cap.

3. Apply PVC cement to the inside of the PVC cap and attach it to one end of the PVC pipe.

4. Apply PVC cement to one end of the PVC elbow and attach it to the other end of the PVC pipe.

5. Apply PVC cement to one end of the PVC tee and attach it to the PVC elbow.

6. Insert the umbrella handle into the hole in the PVC cap.

7. Use zip ties to secure the umbrella to the PVC tee.

Now you have a custom umbrella holder that you can attach to your disc golf Zuca cart. This will keep your umbrella easily accessible and out of the way while you play. Plus, you can easily remove the holder when you don’t need it. With this simple DIY project, you will be ready to face any weather conditions on the disc golf course.

Summary:

Disc golf is a great outdoor activity that can be enjoyed in any weather condition. However, when it rains, it can be challenging to keep your discs and equipment dry. A disc golf Zuca cart is a great investment for disc golf enthusiasts as it can carry all of your discs and equipment. In this article, we will show you how to make a custom umbrella holder for your disc golf Zuca cart.

1. Gather Materials

The first step in making a custom umbrella holder for your disc golf Zuca cart is to gather the necessary materials. You will need a PVC pipe, PVC elbow joint, PVC cap, PVC glue, a drill, and a bungee cord.

2. Measure and Cut PVC Pipe

Using a measuring tape, measure the height of your disc golf Zuca cart. Cut the PVC pipe to the desired length using a saw.

3. Attach PVC Elbow Joint

Using PVC glue, attach the PVC elbow joint to one end of the PVC pipe. The elbow joint will serve as the umbrella holder’s base.

4. Drill Holes

Using a drill, create two holes on the opposite side of the PVC elbow joint. These holes will be used to secure the umbrella holder to the disc golf Zuca cart.

5. Attach PVC Cap

Attach the PVC cap to the top of the PVC pipe using PVC glue. This cap will prevent the umbrella from slipping out of the holder.

6. Secure Umbrella Holder

Using a bungee cord, secure the umbrella holder to the disc golf Zuca cart. Insert the bungee cord through the drilled holes and wrap it around the cart’s frame.

7. Test Umbrella Holder

Test the umbrella holder by inserting an umbrella into the holder. Make sure it is secure and stable.

In conclusion, making a custom umbrella holder for your disc golf Zuca cart is an easy and affordable way to keep your equipment dry during rainy rounds. With these simple steps, you can create a custom umbrella holder that fits your disc golf Zuca cart’s height and style. Enjoy your disc golf game, rain or shine!