How to Make a Custom Big Striper Umbrella Rig

Introduction

Supplies Needed

Step 1: Cut the Wires

Step 2: Attach the Wires

Step 3: Add the Swivels

Step 4: Add the Lures

Step 5: Add the Weights

Step 6: Tie on a Leader

Conclusion

Introduction

Umbrella rigs are a popular choice among anglers who target large fish such as striped bass. These rigs consist of multiple wires with lures attached, and they mimic a school of baitfish swimming through the water. In this article, we will show you how to make a custom big striper umbrella rig that will help you catch more fish.

Supplies Needed

To make a custom big striper umbrella rig, you will need the following supplies:

– 5 or 6 wires (0.035″ or 0.040″ diameter)

– Barrel swivels (size 2 or 3)

– Snap swivels (size 2 or 3)

– Lures (4″ to 6″ swimbaits or shad bodies)

– Weights (2 oz to 4 oz)

– Leader material (50 lb to 80 lb test)

– Pliers

– Wire cutters

Step 1: Cut the Wires

The first step in making a custom big striper umbrella rig is to cut the wires to the desired length. The length of the wires will depend on the size of the lures you plan to use and the spacing you want between them. A good starting point is to cut the wires to 12″ to 14″ in length.

Step 2: Attach the Wires

Once you have cut the wires to the desired length, you will need to attach them to a central wire. The central wire should be slightly longer than the other wires and should have a loop at one end and a snap swivel at the other end. Use pliers to wrap the ends of the wires around the central wire and then crimp them in place.

Step 3: Add the Swivels

Next, you will need to add barrel swivels to each of the wires. The swivels should be placed about 3″ to 4″ from the lure. Use pliers to attach the swivels to the wires and then crimp them in place.

Step 4: Add the Lures

Once the swivels are in place, you can add the lures. The lures should be attached to the swivels using split rings or snap swivels. The lures should be spaced about 6″ to 8″ apart.

Step 5: Add the Weights

To help the rig sink to the desired depth, you will need to add weights to the bottom of the rig. The weights should be attached to the snap swivel at the end of the central wire. Use pliers to attach the weights and then crimp them in place.

Step 6: Tie on a Leader

Finally, you will need to tie on a leader to the snap swivel at the top of the rig. The leader should be about 3′ to 4′ long and should be tied to your main line using a strong knot such as a uni knot or a double uni knot.

Conclusion

Making a custom big striper umbrella rig is a fun and rewarding project that can help you catch more fish. By following the steps outlined in this article, you can create a rig that is tailored to your specific needs and fishing conditions. So, gather your supplies and get started on your own custom umbrella rig today!

An umbrella rig is a popular fishing tool that can help you catch multiple fish at once. This article will show you how to make a custom big striper umbrella rig that is perfect for catching large striped bass.

Materials Needed

Before you start making your umbrella rig, make sure you have all the necessary materials. You will need:

– 3/8-inch stainless steel wire

– 5-inch swimbaits (in your preferred color)

– 1/4-ounce jig heads

– 1/2-inch heat shrink tubing

– Crimp sleeves

– Split ring pliers

– Wire cutters

Step 1: Cut the Wire

The first step is to cut the stainless steel wire to the desired length. For a big striper umbrella rig, we recommend using a 24-inch wire.

Step 2: Bend the Wire

Using your hands or pliers, bend the wire in half to create a loop at the top. This loop will be used to attach the rig to your fishing line.

Step 3: Add the Swimbaits

Take your swimbaits and slide them onto the wire, making sure to space them out evenly. For a big striper umbrella rig, we recommend using five swimbaits.

Step 4: Add the Jig Heads

Next, take your jig heads and attach them to the wire using crimp sleeves. Make sure to space them out evenly between the swimbaits.

Step 5: Add the Heat Shrink Tubing

Slide the heat shrink tubing over the crimp sleeves and use a heat gun to shrink it in place. This will help keep the jig heads in place and prevent them from sliding around on the wire.

Step 6: Attach the Split Rings

Using split ring pliers, attach a split ring to each jig head. These split rings will be used to attach your hooks.

Step 7: Attach Your Hooks

Finally, attach your hooks to the split rings. For a big striper umbrella rig, we recommend using large hooks that are capable of handling the weight of a striped bass.

In conclusion, making a custom big striper umbrella rig is a fun and rewarding project that can help you catch more fish. By following these simple steps, you can create a rig that is perfect for catching large striped bass. Happy fishing!