How to Install Sun Mountain Golf Cart Umbrella Holder

The Sun Mountain Golf Cart Umbrella Holder is a perfect accessory for golfers who want to stay protected from the sun and rain while playing golf. Installing the umbrella holder is easy, and you can do it yourself in just a few simple steps. Here’s how to install the Sun Mountain Golf Cart Umbrella Holder.

Step 1: Prepare the Golf Cart

Before installing the umbrella holder, make sure the golf cart is parked on a level surface and the parking brake is engaged. You should also remove any existing umbrella holders or attachments from the cart.

Step 2: Attach the Mounting Bracket

The Sun Mountain Golf Cart Umbrella Holder comes with a mounting bracket that you need to attach to the golf cart. The bracket has a clamp that fits onto the frame of the golf cart. Place the bracket on the frame where you want to install it and tighten the clamp securely. Make sure the bracket is level and straight.

Step 3: Attach the Umbrella Holder

Once the mounting bracket is securely attached to the golf cart, you can attach the umbrella holder to the bracket. The holder has a screw that fits into the bracket and a wing nut that you can tighten to secure the holder in place. Make sure the holder is aligned with the bracket and tighten the wing nut securely.

Step 4: Adjust the Umbrella Angle

The Sun Mountain Golf Cart Umbrella Holder can be adjusted to different angles to provide maximum protection from the sun or rain. You can adjust the angle by loosening the wing nut and tilting the holder to the desired angle. Once you have the angle you want, tighten the wing nut securely.

Step 5: Install the Umbrella

Finally, you can install the umbrella into the holder. The holder has a spring-loaded mechanism that grips the umbrella handle securely. Simply place the umbrella handle into the holder and push down until it clicks into place. Make sure the umbrella is securely attached to the holder before you start driving the golf cart.

In conclusion, installing the Sun Mountain Golf Cart Umbrella Holder is a simple process that you can do yourself. By following these easy steps, you can enjoy a comfortable and protected golfing experience.

Installing a Sun Mountain golf cart umbrella holder is a quick and easy process that can be done in just a few simple steps. Here’s how to install the Sun Mountain golf cart umbrella holder:

Step 1: Gather the necessary tools and materials.

Before you begin, make sure you have all the necessary tools and materials. You’ll need a drill, a 5/32″ drill bit, a screwdriver, and the Sun Mountain golf cart umbrella holder itself.

Step 2: Choose the location for the umbrella holder.

Decide where you want to install the umbrella holder on your golf cart. The best location is usually on the side of the cart, near the driver’s seat.

Step 3: Drill the holes for the screws.

Using the drill and the 5/32″ drill bit, drill two holes in the location you’ve chosen. Make sure the holes are spaced evenly apart and are the same distance from the ground.

Step 4: Install the umbrella holder.

Insert the screws through the holes in the umbrella holder and into the holes you drilled in the golf cart. Use the screwdriver to tighten the screws until the umbrella holder is secure.

Step 5: Attach the umbrella to the holder.

Once the umbrella holder is installed, you can attach your umbrella to it. Simply slide the umbrella handle into the holder and tighten the clamp until it’s secure.

And that’s it! Your Sun Mountain golf cart umbrella holder is now installed and ready to use. Enjoy a shaded and comfortable round of golf!