How to DIY a Golf Cart Umbrella Holder

Title:

Are you tired of holding your umbrella while playing golf? Do you want to enjoy the game without worrying about getting wet? Then it’s time to make a DIY golf cart umbrella holder! Here’s how:

Materials Needed:

– PVC pipes (1 inch diameter)

– PVC elbow joints

– PVC T-joints

– PVC glue

– Zip ties

– Umbrella

Instructions:

1. Measure the width of your golf cart’s roof to determine the length of the PVC pipes needed. Cut four pipes to this length.

2. Attach two PVC elbow joints to each end of two PVC pipes. These will be the front and back supports of the umbrella holder.

3. Attach a PVC T-joint to the top of each support pipe. Make sure the open end of the T-joint is facing upwards.

4. Cut two shorter PVC pipes and attach them to the T-joints on each support pipe. These will be the side supports of the umbrella holder.

5. Cut two more PVC pipes and attach them to the top of the side supports using T-joints. These will be the crossbars of the umbrella holder.

6. Apply PVC glue to all joints to secure them in place.

7. Use zip ties to attach the umbrella to the crossbars. Make sure the umbrella is centered and secure.

8. Attach the completed umbrella holder to your golf cart’s roof using zip ties or clamps.

And there you have it! A simple and effective DIY golf cart umbrella holder that will keep you dry and comfortable while playing golf. Happy golfing!

Are you tired of holding your golf umbrella while playing? A DIY golf cart umbrella holder may be just what you need! Here’s how to make one:

Materials:

– PVC pipe (1 inch diameter)

– PVC elbow joints (1 inch diameter)

– PVC T-joints (1 inch diameter)

– PVC cement

– Screws

– Drill

– Saw

Instructions:

1. Measure the width of your golf cart’s roof and cut the PVC pipe to fit.

2. Attach two elbow joints to each end of the PVC pipe.

3. Measure the distance between the two elbow joints and cut two smaller pieces of PVC pipe to fit.

4. Attach a T-joint to the end of each smaller PVC pipe.

5. Attach the smaller PVC pipes to the elbow joints on the larger PVC pipe to create a U-shape.

6. Drill holes in the bottom of the T-joints.

7. Screw the holder onto your golf cart’s roof.

Congratulations, you now have a DIY golf cart umbrella holder! This simple project will make your golfing experience much more enjoyable. Plus, you’ll save money by making it yourself.

In summary, follow these steps to create your own golf cart umbrella holder:

1. Measure and cut PVC pipe to fit your golf cart’s roof.

2. Attach elbow joints to each end of the PVC pipe.

3. Cut smaller pieces of PVC pipe to fit between the elbow joints.

4. Attach T-joints to the smaller PVC pipes.

5. Connect the smaller PVC pipes to the elbow joints to create a U-shape.

6. Drill holes in the bottom of the T-joints.

7. Screw the holder onto your golf cart’s roof.

Remember, with a little creativity and some basic materials, you can easily make your own golf cart umbrella holder. Happy golfing!