How to Apply the Umbrella Corp Logo Decal

If you’re a fan of the Resident Evil franchise, you may want to add the iconic Umbrella Corporation logo decal to your car or laptop. But how do you apply it properly? Here are some steps to follow:

1. Clean the surface: Before applying the decal, make sure the surface is clean and dry. Use a mild soap and water to remove any dirt or debris.

2. Measure and position: Measure the area where you want to place the decal and mark it with a piece of tape. Position the decal carefully to ensure it’s aligned with the markings.

3. Peel and stick: Peel off the backing paper from the decal, starting from one corner. Use a credit card or squeegee to smooth out any bubbles as you apply the decal.

4. Remove the transfer tape: Once the decal is in place, use a sharp knife or razor blade to carefully cut away the transfer tape. Take your time to avoid damaging the decal.

5. Let it dry: Allow the decal to dry for at least 24 hours before washing or exposing it to rain or sunlight.

Remember to choose a high-quality decal that’s made with durable materials to ensure it lasts for a long time. You can find Umbrella Corporation logo decals online or at specialty stores that sell Resident Evil merchandise.

By following these simple steps, you can easily apply the Umbrella Corporation logo decal to your favorite surface and show off your love for the Resident Evil franchise.

Are you a fan of the Resident Evil franchise and want to show your love for the iconic Umbrella Corporation? One way to do that is by applying an Umbrella Corp logo decal on your car, laptop, or any other surface. Here’s how you can do it:

Materials Needed

Before you begin, make sure you have the following materials:

– Umbrella Corp logo decal

– Rubbing alcohol

– Clean cloth or paper towel

– Squeegee or credit card

Preparing the Surface

The first step is to prepare the surface where you want to apply the decal. It should be clean and dry. Use rubbing alcohol and a clean cloth or paper towel to wipe the surface and remove any dirt, dust, or grease. Make sure the surface is completely dry before proceeding.

Peeling the Decal

Once the surface is ready, it’s time to peel the decal from its backing paper. Carefully remove the backing paper, making sure that the decal sticks to the transfer tape.

Applying the Decal

Now it’s time to apply the decal to the surface. Hold the transfer tape and decal with one hand and use a squeegee or credit card with the other hand to smooth out the decal on the surface. Start from the center and work your way outwards to avoid any air bubbles or wrinkles.

Removing the Transfer Tape

After you’ve applied the decal, it’s time to remove the transfer tape. Slowly and carefully peel off the transfer tape, making sure that the decal sticks to the surface. If any part of the decal comes off with the transfer tape, use the squeegee or credit card to press it back onto the surface and then try again.

Finishing Touches

Now that the decal is applied, you can give it some finishing touches. Use the squeegee or credit card to smooth out any remaining air bubbles or wrinkles. You can also use a hairdryer on low heat to heat up the decal and make it conform to the surface better.

Conclusion

Applying an Umbrella Corp logo decal is a great way to show your love for the Resident Evil franchise. With the right materials and technique, you can easily apply the decal on any surface. Just make sure to follow the steps carefully and take your time to avoid any mistakes.