How to Apply an Umbrella Corporation Logo Car Decal

If you’re a fan of the Umbrella Corporation from the Resident Evil franchise, you may want to show your support by applying a logo car decal to your vehicle. However, if you’re unfamiliar with the process of applying a decal, you may be hesitant to try it out. In this article, we’ll provide you with a step-by-step guide on how to apply an Umbrella Corporation logo car decal.

Step 1: Clean the Surface

Before applying the decal, you’ll need to make sure that the surface of your car is clean and dry. Use soap and water to wash the area where you plan to apply the decal. Then, use a clean, dry cloth to dry the surface.

Step 2: Position the Decal

Once the surface is clean and dry, you can position the decal where you want it on your car. You can use a measuring tape or ruler to ensure that the decal is centered and level. You may also want to use masking tape to hold the decal in place while you work.

Step 3: Peel Off the Backing

Now that the decal is in position, you can begin to peel off the backing. Start at one corner and slowly peel the backing away from the decal. Be careful not to let the decal fold in on itself.

Step 4: Apply the Decal

With the backing removed, you can now apply the decal to the surface of your car. Use a squeegee or credit card to smooth out any air bubbles and ensure that the decal is firmly in place.

Step 5: Remove the Transfer Tape

Once the decal is firmly in place, you can remove the transfer tape. Start at one corner and slowly peel the transfer tape away from the decal. Be careful not to let the decal come off with the tape.

And there you have it! By following these simple steps, you can apply an Umbrella Corporation logo car decal to your vehicle. Remember to take your time and be patient, and you’ll have a great-looking decal in no time.

Umbrella Corporation Logo Car Decal – An Introduction

The Umbrella Corporation Logo Car Decal is a popular choice for car enthusiasts who want to add some personality to their vehicles. This decal is based on the logo of the fictional Umbrella Corporation, a pharmaceutical company featured in the Resident Evil franchise. The decal is made of high-quality vinyl and is designed to withstand the elements. Applying the decal is a simple process that can be completed in a few easy steps.

Preparing Your Car for the Decal

Before applying the Umbrella Corporation Logo Car Decal, you need to prepare your car’s surface. Start by cleaning the area where you plan to apply the decal. Use a mild soap and water to wash the surface and then dry it with a clean towel. Make sure there is no dirt, dust, or debris on the surface. If there are any wax or polish residues, use rubbing alcohol to clean the area thoroughly.

Positioning the Decal

Once the surface is clean and dry, you can start positioning the decal. Carefully peel off the backing paper from the decal and position it on the surface. You can use a tape measure or ruler to ensure the decal is centered and aligned correctly. Make sure the decal is not touching the surface yet, so you can adjust its position if needed.

Applying the Decal

Now that you have positioned the decal correctly, it’s time to apply it. Use a squeegee or credit card to smooth out the decal on the surface. Start from the center and work your way outwards, making sure there are no bubbles or wrinkles. Apply firm pressure to the decal to ensure it adheres to the surface properly.

Removing the Transfer Tape

Once the decal is applied, you can remove the transfer tape. Gently peel off the transfer tape from the surface, making sure the decal is not coming off with it. If you notice any part of the decal is not sticking to the surface, use the squeegee or credit card to apply more pressure to that area.

Final Touches

After applying the Umbrella Corporation Logo Car Decal, you can give your car some final touches. Use a hairdryer or heat gun to heat up the decal and ensure it adheres to the surface properly. This will also help to remove any bubbles or wrinkles that may have formed during the application process. Once you are satisfied with the decal’s position, you can trim any excess vinyl with a sharp knife or scissors.

Conclusion

Applying an Umbrella Corporation Logo Car Decal is a simple process that can be completed in a few easy steps. With proper preparation and application, your decal will look great on your car and last for years to come. Follow the steps outlined above to apply your decal and show off your love for the Resident Evil franchise.