How to Apply an Umbrella Corp Logo Decal

Umbrella Corporation is a fictional company in the Resident Evil video game series. The logo of Umbrella Corp is iconic and recognized by many fans. If you are a fan of the series, you might want to apply an Umbrella Corp logo decal to your car, laptop, or any other surface. Here is how you can do it:

1. Clean the surface

Before applying the decal, make sure the surface is clean and dry. Use soap and water to wash the surface, and then dry it with a clean cloth. Any dirt or dust on the surface can prevent the decal from sticking properly.

2. Peel off the backing paper

Peel off the backing paper from the decal. Be careful not to touch the adhesive side of the decal with your fingers, as this can leave oil marks on the decal.

3. Apply the decal

Place the decal on the surface and use a credit card or squeegee to smooth out any bubbles or wrinkles. Start from the center of the decal and work your way outwards. Make sure the decal is aligned properly and centered on the surface.

4. Remove the transfer tape

Once the decal is applied, remove the transfer tape by peeling it off slowly at a sharp angle. If the decal starts to lift up with the transfer tape, press it down again and use the credit card or squeegee to smooth it out.

5. Let it dry

Let the decal dry for at least 24 hours before exposing it to water or extreme temperatures. This will allow the adhesive to fully bond with the surface.

In conclusion, applying an Umbrella Corp logo decal is a simple process that can be done by anyone. Just make sure the surface is clean and dry, and take your time to apply the decal properly. With a little patience, you can show off your love for the Resident Evil series with a cool Umbrella Corp logo decal.

If you’re a fan of the iconic Umbrella Corporation from the Resident Evil franchise, you may want to show off your love by applying a logo decal to your car, laptop, or any other surface. Applying a decal can be a simple process if you follow the steps below.

Step 1: Clean the surface

Before applying the decal, make sure the surface is clean and dry. Use a cloth and some rubbing alcohol to remove any dirt, dust or grease that may be on the surface. This will ensure that the decal sticks properly.

Step 2: Position the decal

Carefully position the decal on the surface where you want it to be. You can use a measuring tape or ruler to ensure that the decal is centered and straight.

Step 3: Secure the decal

Once you have positioned the decal, use masking tape to hold it in place. This will prevent it from moving while you’re applying it.

Step 4: Peel off the backing

Peel off the backing paper from the decal, starting from one corner. Be careful not to tear the decal or stretch it out of shape.

Step 5: Apply the decal

Carefully apply the decal to the surface, starting from the center and working your way outwards. Use a credit card or squeegee to smooth out any bubbles or wrinkles.

Step 6: Remove the masking tape

Once you have applied the decal, slowly remove the masking tape. Pull it back at a 45-degree angle to avoid pulling up the decal.

Step 7: Let it dry

Allow the decal to dry for at least 24 hours before exposing it to water or sunlight. This will ensure that the decal adheres properly and lasts longer.

In conclusion, applying an Umbrella Corp logo decal is a simple process that can be done in a few easy steps. Follow these instructions and you’ll have a cool decal to show off your love for the Resident Evil franchise.