How to Add an Umbrella Logo to Your AR15 Dust Cover
If you are a gun enthusiast and want to add a personal touch to your AR-15, then adding an umbrella logo to your dust cover is a great way to do so. The process is actually quite simple and can be done in a few easy steps.
Step 1: Remove the Dust Cover
The first step is to remove the dust cover from your AR-15. This can be done by using a punch or a screwdriver to remove the retaining pin that holds the dust cover in place.
Step 2: Sand the Dust Cover
Once the dust cover is removed, use sandpaper to rough up the surface of the cover. This will help the paint adhere better.
Step 3: Apply Paint
Next, apply a base coat of paint to the dust cover. This can be any color you prefer, but white or gray works best as a base coat. Allow the paint to dry completely before moving on to the next step.
Step 4: Apply the Umbrella Logo
Using a stencil or freehand, apply the umbrella logo onto the dust cover. You can use any color of paint you prefer for this step. Allow the paint to dry completely before moving on to the next step.
Step 5: Apply a Clear Coat
Once the logo is dry, apply a clear coat of paint to the entire dust cover. This will help protect the paint and logo from wear and tear.
Step 6: Reinstall the Dust Cover
Finally, reinstall the dust cover onto your AR-15. Use the punch or screwdriver to reinsert the retaining pin and secure the dust cover in place.
In conclusion, adding an umbrella logo to your AR-15 dust cover is a great way to personalize your firearm. With just a few simple steps, you can create a unique and eye-catching design that will make your gun stand out from the rest.
Introduction
Materials Needed
Step 1: Disassemble Your AR-15
Step 2: Remove the Dust Cover
Step 3: Clean the Dust Cover
Step 4: Apply the Logo Stencil
Step 5: Paint the Logo
Step 6: Let the Paint Dry
Step 7: Reassemble Your AR-15
Conclusion
Introduction
Customizing your AR-15 is a great way to make it unique and truly your own. One way to do this is by adding a logo to your dust cover. In this article, we will show you how to add an umbrella logo to your AR-15 dust cover.
Materials Needed
– AR-15
– Dust cover
– Umbrella logo stencil
– Paint
– Paintbrush
– Tape
– Cleaning solution
Step 1: Disassemble Your AR-15
Before you begin, make sure your AR-15 is unloaded and the safety is engaged. Then, disassemble your AR-15 by removing the upper and lower receivers.
Step 2: Remove the Dust Cover
Next, remove the dust cover from your AR-15. This can be done by pushing the retaining pin out and sliding the dust cover off.
Step 3: Clean the Dust Cover
Use a cleaning solution to thoroughly clean the dust cover. This will ensure that the paint adheres properly.
Step 4: Apply the Logo Stencil
Place the umbrella logo stencil onto the dust cover and secure it with tape. Make sure the stencil is centered and straight.
Step 5: Paint the Logo
Using a paintbrush, carefully paint the logo onto the dust cover. Apply several thin coats of paint, allowing each coat to dry before applying the next.
Step 6: Let the Paint Dry
Once you have finished painting the logo, let the paint dry completely. This can take several hours, so be patient.
Step 7: Reassemble Your AR-15
Once the paint has dried, remove the stencil and reassemble your AR-15. Your new umbrella logo dust cover is now ready to use!
Conclusion
Adding a logo to your AR-15 dust cover is a simple and fun way to customize your rifle. By following these steps, you can easily add an umbrella logo to your dust cover and make your AR-15 truly your own.