DIY Guide How to Make Your Own Golf Umbrella Holder
Golfing on a sunny day can be a great experience, but when it starts raining, it can quickly become a soggy mess. That’s where a golf umbrella comes in handy. However, holding onto an umbrella while trying to swing a club can be difficult. That’s why a golf umbrella holder is a must-have accessory for any golfer. In this DIY guide, we’ll show you how to make your own golf umbrella holder.
Materials Needed:
– PVC pipe (1 inch in diameter)
– PVC elbow joint
– PVC T-joint
– PVC cap
– PVC cement
– Drill
– Hole saw bit
– Measuring tape
– Marker
Step 1: Measure and Cut the PVC Pipe
Using a measuring tape and marker, measure and mark the PVC pipe to 18 inches in length. Use a saw to cut the pipe at the marked point.
Step 2: Drill Holes in the PVC Pipe
Using a drill and a hole saw bit, drill two holes into the PVC pipe. The holes should be spaced apart by 2 inches and should be 1 1/8 inches in diameter.
Step 3: Assemble the PVC Pipe and Joints
Apply PVC cement to the inside of the PVC elbow joint and attach it to one end of the PVC pipe. Then, apply PVC cement to the inside of the PVC T-joint and attach it to the other end of the PVC pipe.
Step 4: Attach the PVC Cap
Apply PVC cement to the inside of the PVC cap and attach it to the open end of the PVC T-joint.
Step 5: Let the PVC Cement Dry
Allow the PVC cement to dry for at least 24 hours before using the golf umbrella holder.
Step 6: Use the Golf Umbrella Holder
To use the golf umbrella holder, simply insert the umbrella handle into one of the holes on the PVC pipe. The holder will keep the umbrella in place, allowing you to golf without worrying about holding onto the umbrella.
Conclusion:
Making your own golf umbrella holder is a simple and cost-effective way to improve your golfing experience. With just a few materials and some basic tools, you can create a holder that will keep your umbrella in place, allowing you to focus on your game. So, grab your materials and get started on this fun DIY project today!
Golfers know the importance of having an umbrella on the course. However, holding it while swinging can be a challenge. That’s why having an umbrella holder for your golf bag is essential. In this guide, we will show you how to make your own golf umbrella holder.
Materials:
– PVC pipe (1 inch diameter)
– PVC elbow joint (1 inch diameter)
– PVC end cap (1 inch diameter)
– PVC cement
– Drill
– Hole saw drill bit (1 inch diameter)
– Ruler
– Marker
– Saw
Instructions:
1. Measure the length of the umbrella handle. Add 2 inches to this measurement and mark the PVC pipe.
2. Cut the PVC pipe to the marked length using a saw.
3. Apply PVC cement to the inside of the PVC elbow joint and attach it to one end of the PVC pipe.
4. Apply PVC cement to the inside of the PVC end cap and attach it to the other end of the PVC pipe.
5. Using a drill and a hole saw drill bit, create a hole in the PVC elbow joint. The hole should be the same diameter as the umbrella handle.
6. Insert the umbrella handle into the hole and test to make sure it fits securely.
7. Your golf umbrella holder is now complete! Attach it to your golf bag and enjoy playing golf in the rain without having to hold your umbrella.
Conclusion:
Making your own golf umbrella holder is a fun and easy DIY project that can save you money and make your golf game more enjoyable. With just a few materials and some basic tools, you can create a custom umbrella holder that fits your golf bag perfectly. Try making one today and see how it can improve your golfing experience!